manifestation_id	original_title	title_alternative	title_transcription	statement_of_responsibility	serial	manifestation_identifier	creator	contributor	publisher	date_of_publication	year_of_publication	publication_place	manifestation_created_at	manifestation_updated_at	carrier_type	content_type	frequency	language	isbn	issn	ncid	volume_number	volume_number_string	edition	edition_string	issue_number	issue_number_string	serial_number	extent	start_page	end_page	dimensions	height	width	depth	manifestation_price	access_address	manifestation_required_role	abstract	description	identifier:unknown	identifier:nbn	identifier:isbn10	identifier:iss_itemno	identifier:online_isbn	identifier:print_isbn	identifier:print_issn	identifier:online_issn	identifier:escidoc	identifier:nims	series_statement_id	series_statement_original_title	series_statement_title_subseries	series_statement_title_subseries_transcription	series_statement_title_transcription	series_statement_creator	series_statement_volume_number	series_statement_series_master	series_statement_root_manifestation_id	series_statement_manifestation_id	series_statement_position	series_statement_note	series_statement_created_at	series_statement_updated_at	subject:ndlsh	subject:unknown	subject:bsh	classification:ndc8	classification:ndc9	classification:udc	doi	jpno	ncid	lccn	iss_itemno	item_id	item_identifier	binding_item_identifier	call_number	library	shelf	item_note	accepted_at	acquired_at	item_created_at	item_updated_at
105416	"Heat-induced breakage of an optical circuit at a TeO2
glass bridge linking silica glass fibers"						TODOROKI, Shin-ichi	""	""	2006-08-01 00:00:00 +0900	2006		2015-12-15 21:30:36 +0900	2022-07-17 23:11:35 +0900	online_resource	text	unknown	English	""	""										709	712						https://hdl.handle.net/20.500.11932/28314	Guest	"The irreversible transformation of a tellurum oxide glass layer
inserted between two ends of two silica glass optical fibers was
monitored via the intensity of a light passed through the circuit.  This
structure is used for a heat-induced optical fuse after the soft glass
layer has been coated with a light absorber.  Heat-induced breakage
occurred when the glass crystallized or flowed in the presence of a
shearing stress.  Without the stress, the optical link was maintained
through the glass melt but suddenly broke due to the crystallization.
On the other hand, the stress deformed the glass bridge and broke the
optical link less than 0.4 sec.  Thus, the shearing stress at the
splicing point helps the device respond immediately and reliably."		""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	""	optical fiber//telluria glass//plastic flow//optical fuse	""	""	""	""